You sent the same inquiry to six bed sheet manufacturers. Two weeks later, you have six quotes — and none of them can be compared. One quotes per set, another per piece. One assumes a light 200-thread-count construction, another assumes a dense 400-thread-count sateen. Three of them replied with fifteen clarifying questions each. The cheapest quote looks like a bargain until you realize it describes a completely different fabric than the one you imagined. If this sounds familiar, the problem is almost never the factories. It is the RFQ.
A bed sheet manufacturer can only quote what you describe. When the request is vague — “100% cotton sheets, queen size, good quality, best price” — every factory fills in the blanks differently. Some assume the cheapest possible construction to win on price. Others pad the quote to cover the risk of your unknown expectations. どちらにしても, you end up comparing numbers that describe different products, and the “cheapest” supplier often becomes the most expensive mistake once samples arrive and nothing matches what you pictured.
The good news: writing an RFQ that gets fast, accurate, comparable quotes is a learnable skill, and it takes less time than the back-and-forth it replaces. This guide breaks down the nine building blocks every complete bed sheet RFQ needs, shows you how to describe fabric even if you are not a textile expert, and gives you a copy-paste template you can send today. Whether you are an importer, a brand, an e-commerce seller, or a hotel buyer, a sharper RFQ is the fastest way to find the right bed sheet manufacturer — and the right price — on the first round.
Why Vague RFQs Produce Useless Quotes
Put yourself in the factory’s quoting seat for a moment. An email arrives: “こんにちは, we need 5,000 sets of queen-size cotton bed sheets. Please quote your best price.” What would you quote? The cotton could be carded or combed, 30s or 60s yarn, an open or a dense construction. The set could be a fitted sheet plus two pillowcases, or a flat sheet plus two pillowcases. The fabric could be greige, bleached white, or dyed navy — and dyeing alone changes the cost structure. Without these details, quoting is guesswork, and manufacturers like インテグリティテキスタイル see this pattern every week: buyers who write two-line RFQs, then spend a month untangling the confusion those two lines created.
There are only three things a factory can do with an incomplete RFQ, and all three hurt you. 初め, it can quote the cheapest plausible interpretation — which wins the order on paper and loses it in sampling when the product feels nothing like your expectation. 2番, it can quote a safe, padded price that covers every possible interpretation — which makes a good factory look expensive. 三番目, it can reply with a long list of clarifying questions — which is the honest option, and also the slowest. None of these outcomes is the factory’s fault. The RFQ is your specification, and its completeness sets the ceiling on quote quality.
The fix is not a longer email. It is a complete one. Nine pieces of information, presented in a consistent format, turn your RFQ from a guessing game into a technical document any professional bed sheet manufacturer can price in a single pass — often within 24 に 48 hours instead of two weeks of clarification rounds.
の 9 Building Blocks of a Complete Bed Sheet RFQ
Think of these as the checklist you run through before hitting send. If any block is missing, add it — or explicitly mark it as flexible (“open to factory recommendation”). A stated flexibility is information too: it tells the factory where it is allowed to optimize for your target price.
1. Exact Product and Set Composition
“ベッドシーツ” is not a product. A fitted sheet, a flat sheet, and a duvet cover are different products with different fabric consumption and sewing time, そして “set” can mean several things. State exactly which pieces are included — for example, “1 ボックスシーツ + 2 枕カバー” または “1 フラットシート + 1 ボックスシーツ + 2 pillowcases.” If you sell duvet cover sets that need matching sheets, そう言う: factories that make both can optimize fabric purchasing across the program, which can quietly lower your cost. Also note whether the sheet is for retail, おもてなし, or institutional use, because each channel has different construction norms.
2. Fiber Content
Fiber is the single biggest cost driver in a sheet, so this line deserves precision. “100% コットン” is a start, but take it further: combed or carded cotton, long-staple or standard staple, and whether blends are acceptable. Common constructions include 100% コットン, cotton/polyester blends, 竹ビスコース, Tencel lyocell, リネン, and cotton-rich blends. Each fiber brings a different price point and a different hand feel. If you are open to alternatives, write “100% cotton preferred; open to cotton-rich blends if it helps meet the target price” — that one sentence can unlock options a rigid spec would hide.
3. Yarn Count, Thread Count and Weave
Yarn count (for example 30s, 40s, 60s) describes how fine the yarn is; weave describes the structure — percale (plain weave, crisp and cool) and sateen (satin weave, smooth with a soft sheen) being the two workhorses of the sheet world. Thread count is the number most buyers quote, but factories price from yarn count, 織ります, and fabric weight — thread count alone determines neither cost nor quality. Write all three if you know them (“40s x 40s, パーケール”); if you only know the thread count from a competitor’s product, say so honestly and let the factory propose the matching construction.
4. Fabric Weight (GSM)
Grams per square meter tells the factory how much raw material goes into each sheet — it is one of the most honest cost levers in the RFQ. Two sheets with the same thread count can feel completely different if one is woven denser and heavier. If you do not know the GSM of your reference product, ask the factory to propose a weight for the hand feel you want. Stating GSM — or asking for a recommendation tied to a hand-feel description — removes one of the most common sources of quote-to-sample mismatch.
5. Dimensions and Tolerances
Sheet sizes are a minefield because “女王” means different things in different markets. Always give finished dimensions in centimeters or inches — length x width for flat sheets, plus pocket depth for fitted sheets (例えば, “ボックスシーツ 152 x 203 cm, 35 cm pocket, full elastic”). State whether sizes are finished or cut sizes, and give a tolerance (例えば, +/- 2 cm). Fitted-sheet details matter enormously: elastic all around versus elastic at the corners only, corner construction, and hem width all change both cost and performance. This is the section where most RFQ failures are born, so spend the extra five minutes.
6. Dyeing, Printing and Finishing
Color is a process, not just a choice. Specify: greige (unbleached), bleached white, solid dyed (and the dyeing method if you care — reactive dyeing costs more than direct dyeing but holds color far better), yarn-dyed stripes or checks, or printed (and how many colors — each color in rotary printing is a separate screen and a separate pass). Then finishing: softening, easy-care or wrinkle-free treatments, 収縮前. If you need specific colorfastness performance — for hotel laundry, for example — state the requirement rather than the chemistry and let the factory propose the route.
7. Packaging and Labeling
Packaging is the RFQ section buyers most often forget and factories most often have to ask about. A plain polybag, a polybag with an insert card, a PVC bag, a belly band, or a full retail gift box are entirely different cost items. Specify your private-label needs: main label, care label content and language, hang tags, バーコード, and any market-specific compliance labeling. If you want a costed option, ask for two packaging quotes — standard and upgraded — so you can see the delta instead of guessing.
8. Order Quantity and Delivery Terms
Give the trial order quantity and the expected annual or per-reorder volume separately — factories price these differently, and hiding a small trial inside a big annual promise helps nobody. State your Incoterms preference (EXW, FOB, CIF, or DAP) and the destination port or city, because freight and handling change the landed math. If you have a must-hit delivery date — a seasonal launch, a hotel opening — say so upfront; a factory that cannot meet your timeline should tell you now, not after sampling.
9. Target Price and Payment Terms
This is the block most buyers skip out of habit — and the one that saves the most time. Stating a target price does not weaken your negotiating position; it focuses the factory’s engineering on your reality instead of its guess. 南通誠実紡織 works on a “respect target price” model: you name the target price, and the factory answers make-or-not — no endless haggling, no padded quotes. Pair the target with payment terms (例えば, T/T deposit plus balance before shipment) so the quote reflects your real commercial terms, not a generic default.
How to Describe Fabric When You Are Not a Textile Expert
You do not need a textile degree to write a good fabric spec — you need a reference sample. The single most effective sentence in any RFQ is: “Please match the hand feel and appearance of the enclosed reference sample.” Factories work from physical references every day; a swatch in an envelope communicates in seconds what three paragraphs of adjectives cannot. If you cannot send a physical sample yet, send high-resolution photos of the fabric face and back, plus a short hand-feel description (“crisp and cool like percale” または “smooth with a soft sheen like sateen”).
When you do write the fabric line yourself, four descriptors cover nearly everything a factory needs: 繊維含有量, 糸番手, 織ります, and GSM. “100% combed cotton, 40s x 40s, パーケール, reactive-dyed navy” is a complete fabric specification that any professional bed sheet manufacturer can price without a single follow-up question. Compare that with “good quality cotton, dark blue” — which could describe twenty different fabrics at twenty different prices. Precision here is not fussiness; it is the difference between comparable quotes and chaos.
One more honest option: describe the end use and let the factory propose the fabric. “Hotel sheets, 白, 200+ 工業用洗浄剤, comfortable hand feel, target price X” gives an experienced manufacturer everything it needs to engineer a construction for your application. This works best with factories that already serve your channel — a hotel-linen specialist will propose differently than a retail fashion-bedding specialist, and that difference is valuable information, not a compromise.
Size Specifications: The Traps That Ruin Sheet Orders
The most expensive RFQ mistake is also the most boring: wrong sizes. A US queen flat sheet, a UK king flat sheet, and an EU 240 x 260 cm flat sheet are three different products, and buyers routinely write “queen/king” assuming the factory shares their market’s definition. It often does not. Write every dimension as a number with a unit, state the market the sizes serve, and confirm whether your measurements are finished size (after all processing) or cut size (before sewing and shrinkage). Factories build in shrinkage allowances during cutting; if you give cut sizes as finished sizes, every piece arrives small.
Fitted sheets deserve their own paragraph in your RFQ because they carry the most variables: pocket depth must match the mattress heights in your market (deep-pocket variants exist for pillow-top mattresses), elastic can run all the way around or sit at the corners only, and corner seams can be single or reinforced. Each choice changes material use and sewing minutes. Spell out “full elastic, 35 cm pocket” または “corner elastic only, 30 cm pocket” rather than writing “ボックスシーツ” and hoping. Hope is not a specification.
ついに, state a tolerance and a measurement method: “finished size +/- 2 cm, measured after one wash” または “cut size +/- 1 cm.” Tolerances protect both sides — they acknowledge that textiles move, while giving QC a pass/fail line. An RFQ without tolerances invites disputes; an RFQ with them invites clean inspections.
量, Lead Time and the Target-Price Shortcut
Quantity changes everything about a quote, so split your numbers honestly: trial order quantity, first bulk quantity, and estimated annual volume. Factories amortize setup costs — screens for printing, cutting markers, lab dips for color approval — across the order; a 500-set trial and a 10,000-set program get different unit economics, and a factory that knows both will often sharpen the trial price to win the program. Hiding a small trial behind a large forecast, or vice versa, just produces a quote for an order that will never exist.
On lead time, work backwards from your must-ship date and name each stage: サンプリング (including lab dips for dyed colors), sample approval, 大量生産, 検査, and freight. A realistic timeline stated in the RFQ lets the factory flag conflicts immediately — “your 45-day target is achievable for solid colors but not for a 6-color print” is information you want in week one, not week six. If timing is flexible, say which end is flexible; factories can often trade a week of lead time for a better price if they know it is allowed.
And the shortcut: name your target price. The traditional RFQ dance — vague inquiry, padded quote, three rounds of negotiation — exists because neither side states its number first. A target price collapses that dance into a single engineering question: can this specification be made at this price? If yes, you move to sampling. If no, the factory tells you which specification to relax. Either answer arrives in days, 数週間ではない, and both are more useful than a “best price” that nobody can build to.
A Copy-Paste RFQ Template You Can Send Today
Below is a template built from the nine blocks above. Replace the bracketed fields, attach your reference photos or samples, and send it to three to five manufacturers. You will be surprised how fast the replies come back — and how comparable they are.
主題: RFQ — [Fitted Sheet Set / Flat Sheet Set], [Fiber, 例えば, 100% コーマ綿], [量] セット
1. 製品: [例えば, 1 ボックスシーツ + 2 枕カバー]. End use: [小売り / hotel / institutional].
2. ファブリック: [繊維含有量], [糸番手, 例えば, 40s x 40s], [織ります: percale/sateen], [thread count if known], [GSM if known, または “please propose for a soft, smooth hand feel”]. 参考サンプル [enclosed / to follow / photos attached].
3. Color and finish: [solid dyed — color references attached / printed — artwork attached, X colors / white bleached]. 仕上げ: [soft wash / easy-care / none]. Dyeing method: [reactive preferred / open to factory recommendation].
4. サイズ (finished, cm): [例えば, fitted 152 x 203, 35 cm pocket, full elastic; 枕カバー 50 x 75]. Tolerance: [+/- 2 cm]. Market: [US / イギリス / EU / other].
5. Packaging and labeling: [例えば, polybag + カードを挿入します; private main label and care label artwork to follow]. Please also quote an upgraded retail-box option.
6. 量: Trial [×] セット; first bulk [Y] セット; estimated annual [Z] セット.
7. Terms: [FOB Shanghai / CIF Rotterdam / EXW] — please quote FOB as baseline. 目標価格: [USD X per set, FOB]. Payment: [T/T deposit, balance before shipment].
8. タイムライン: Samples needed by [date]; bulk delivery needed by [date].
9. 認証: [OEKO-TEX標準 100 required / other: ___].
That is the entire RFQ. Nine blocks, one page, zero ambiguity — and every serious bed sheet manufacturer can quote it in a single pass.
Five RFQ Mistakes That Slow Your Quotes to a Crawl
- Mistake 1: Quoting “best price” without a target. “Best price” is not a specification — it is an invitation to guess. Name a target price and let factories engineer toward it or decline honestly. You will get fewer quotes and better ones.
- Mistake 2: Sending artwork and specs in five separate emails. Consolidate everything into one RFQ document with attachments listed by name. Scattered information gets scattered quotes — or no quote at all, because the factory cannot tell when the RFQ is complete.
- Mistake 3: Forgetting the pillowcases. A surprising number of “シートセット” RFQs never specify pillowcase size, 閉鎖 (envelope versus open end), or quantity per set. The factory guesses, the quote assumes, and the sample surprises. Two lines prevent it.
- Mistake 4: Mixing markets in one RFQ. Asking for “queen size for US and EU” in a single line forces the factory to pick one — usually the wrong one. Split sizes by market or pick one market per RFQ round.
- Mistake 5: Treating the RFQ as the negotiation. The RFQ’s job is to produce comparable quotes, not to win the lowest price. Get clean quotes first; negotiate second. Buyers who negotiate inside the RFQ (“we need the absolute lowest price, premium quality, small MOQ, fast delivery”) get quotes that promise everything and samples that deliver nothing.
Frequently Asked Questions About Bed Sheet RFQs
How many manufacturers should I send my RFQ to?
Three to five is the practical range. Fewer than three gives you no comparison; more than five creates a quoting workload you cannot evaluate properly, and serious factories can tell when they are one of twenty — response quality drops. Send the identical RFQ to each, compare the line items (not just the totals), and shortlist two for sampling. If you need help structuring the comparison, ask 私たちの工場 for a spec checklist — a manufacturer that helps you compare quotes fairly is usually one worth sampling with.
Should I ask for FOB or EXW pricing?
Ask for FOB as your baseline — it is the most comparable term across factories because it includes export handling up to the vessel at a named port. EXW is useful if you run your own freight forwarding and want to see the pure factory-gate cost. You can always ask for both; the delta between them tells you how much logistics the factory is bundling. For CIF or DAP, remember that freight rates move, so treat those quotes as time-sensitive.
Can a manufacturer quote accurately without a physical sample?
Yes — if the RFQ is complete. A full written specification (the nine blocks above) is quotable on its own; the physical sample then serves as confirmation rather than discovery. The trouble starts when buyers send a photo and write “make it like this” — photos cannot show yarn count, GSM, または仕上げ. If a physical reference exists, send it; if not, a complete written spec plus a target price gets you nearly all the way there.
How long should a proper quote take?
For a standard specification, 24 に 72 hours is normal. Complex prints, custom weaves, or new developments can take a week because the factory may need to check greige availability or strike off a lab dip. If a quote takes more than a week with no interim update, the RFQ was probably incomplete — check which of the nine blocks you skipped. Speed of quoting is itself a useful signal: factories that quote fast and ask sharp questions tend to produce fast and answer sharp questions.
Is it safe to reveal my target price in the RFQ?
Yes — and it is the fastest route to a workable quote. A target price tells the factory which materials and constructions to engineer toward instead of guessing your budget from silence. の “respect target price” approach exists precisely for this: you state the number, the factory answers make-or-not, and both sides skip the ritual haggling. The only caution is to make the target realistic for the specification; a champagne spec with a tap-water target gets a polite decline, which is still useful information.
What if I only need a small trial order?
State it plainly as a trial, alongside your realistic reorder outlook. Most established manufacturers accept trial quantities — often with a modest small-order adjustment — when they can see the program behind it. What factories resist is not small orders but unclear ones: a 300-set trial described honestly gets quoted; a 300-set trial disguised as a 10,000-set program gets discovered at sampling and poisons the relationship. Honesty about quantity is free and it compounds.
Send Your RFQ to a Manufacturer That Answers Clearly
A great RFQ deserves a manufacturer that treats it seriously — one that quotes line by line, flags specification risks before sampling, and answers a target price with a straight yes or no. 南通誠実紡織 (NANTONG INTEGRITY TEXTILE) has manufactured and exported mid- to high-end home textiles since 2007, producing sheet sets, 布団カバーセット, quilted bedding, ホテルのリネン, 毛布, and pillows on about 30,000 square meters of production space, with a monthly capacity of around 40,000 寝具セット. The factory is certified to ISO9001, ISO14001, and ISO45001, and its products meet OEKO-TEX Standard 100.
Send the nine-block RFQ above — or just your target price and a reference sample — and get a clear, comparable quote. To お問い合わせ: email Alex@integritytex.com, ワッツアップ +86 151 5289 1159, or visit www.integritytex.com. The fastest quotes come from the clearest RFQs — start with yours today.
